PWM Motor Governor(30V/12A/360W)
Product parameter:
Working voltage: DC5V~30V (pay attention not to connect the positive and negative poles reversely and not to connect the alternating current)
Rated current: 12A
Maximum current: 20A
Maximum power: 360W
Working frequency: 1KHz~99KHz adjustable, 1 KHz step, default frequency 20KHz, accuracy about 1%; (The higher the frequency, the more the MOS tube heats up, so try to choose a low frequency)
The display value range: 00.0 -100 is adjustable, representing the minimum duty cycle to the maximum duty cycle
Slow start time: 0.0-9.9 seconds
Slow stop time: 0.0-9.9 second.
Step value size: 0.1-25 Step can be selected.
Product dimensions: 79mm*43mm*26mm.
Opening size for installation: 39.3mm*76.5mm
Product weight: 42g (net weight), 65g (including packaging).
- Comments(0)
You might like
-
-
-50%PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$0.99 or 120 BeansRedeem Now
-
-
-
Four Way Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now
-
-50%1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$0.99 or 120 BeansRedeem Now
-
Relay Module Interface Boards for Arduino Low Level Trigger 5V 2 Channels$2.00 or 200 BeansRedeem Now
-
-
LM2596S DC-DC 3A Buck Adjustable Step-down Power Supply Converter Module$0.99 or 120 BeansRedeem Now
-
-
-
-
-
Step-Down & Step-Up Converter DC-DC 1.8V-5V 3V 3.7V to 3.3V Power Module$1.00 or 100 BeansRedeem Now
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now
-
-
Dual 18650 Battery Holder V3 Development Board(Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now