PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Comment pouvons- nous vous aider?

V-cut standard-Limited to Quick-turn PCB

Reason of failed review,there are 4 reasons.

A:The board size is less than 75*45/75*75mm.

B:The v-cut lines are not straight and through the whole board.

C:The spacing between the V-CUT lines and copper lines is less than 0.4mm.

D:the boards thickness is under 0.6mm.


Suggestions:

A: The board size in direction for V-CUT lines should be 75mm at least,the other side which don't do V-CUT should be 45mm at least.If there are V-CUT lines in  X and Y direction ,then the board size should be over 75*75mm.

B:The V-CUT lines should be straight and through the whole board.

C:The spacing between the V-CUT lines and copper lines should be over 0.4mm to avoid damaging the copper lines.

D:The boards thickness which can do V-CUT is over 0.6mm.

E:If the 4 items can't be fixed ,the V-CUT lines can be deleted and ignored  or  the boards can arranged in our high precision factory to do ,the price will be different.

a2.jpg

Commentaires (0)
Les informations complémentaires sont données à titre indicatif et ne sont pas liéescontractuellement aux opérations commerciales. Si vous avez une question urgente ou un problème lié à votre commande, veuillez contacter votre représentant commercial.
Vous pouvez télécharger un seul fichier au total. Chaque fichier ne peut pas dépasser 2 Mo. Nous acceptons JPG, JPEG, GIF, PNG, BMP
0 / 10000