● Excellent tracking resistance,CTI≥600V
● UV Blocking
● Good PCB processablity
● Not recommended fro solder mask rework
● PDP, LCD, power base board, TV, refrigerator, washing machine, and etc.
● Not suitable for Anti-CAF application
Product Performance
Items | Method | Condition | Unit | Typical Value | |
Tg | IPC-TM-650 2.4.25 | DSC | ℃ | 135 | |
Td | IPC-TM-650 2.4.24.6 | 5% wt. loss | ℃ | 310 | |
CTE (Z-axis) | IPC-TM-650 2.4.24 | Before Tg | ppm/℃ | 55 | |
After Tg | ppm/℃ | 308 | |||
50-260℃ | % | 4.5 | |||
Thermal Stress | IPC-TM-650 2.4.24.13 | 288℃, solder dip | -- | >100S No Delamination | |
Volume Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ.cm | 5.0E + 08 | |
E-24/125 | MΩ.cm | 5.0E + 06 | |||
Surface Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ | 5.0E + 07 | |
E-24/125 | MΩ | 5.0E + 06 | |||
Arc Resistance | IPC-TM-650 2.5.1 | D-48/50+D-4/23 | s | 126 | |
Dielectric Breakdown | IPC-TM-650 2.5.6 | D-48/50+D-4/23 | kV | 60 | |
Dissipation Constant (Dk) | IPC-TM-650 2.5.5.9 | 1MHz | -- | 4.7 | |
IEC 61189-2-721 | 10GHz | -- | — | ||
Dissipation Factor (Df) | IPC-TM-650 2.5.5.9 | 1MHz | -- | 0.016 | |
IEC 61189-2-721 | 10GHz | -- | — | ||
Peel Strength (1oz HTE copper foil) | IPC-TM-650 2.4.8 | A | N/mm | — | |
After thermal Stress 288℃,10s | N/mm | 1.8 | |||
125℃ | N/mm | 1.6 | |||
Flexural Strength | LW | IPC-TM-650 2.4.4 | A | MPa | 550 |
CW | IPC-TM-650 2.4.4 | A | MPa | 450 | |
Water Absorption | IPC-TM-650 2.6.2.1 | E-1/105_D-24/23 | % | 0.10 | |
CTI | IEC60112 | A | Rating | PLC 0 | |
Flammability | UL94 | C-48/23/50 | Rating | V-0 | |
E-24/125 | Rating | V-0 |
1. Specification sheet: IPC-4101/21, is for your reference only.
2. All the typical value is based on the 1.6mm specimen,while the Tg is for specimen≥0.50mm.
3. All the typical value listed above is for your reference only,please turn to Shengyi Technology Co., Ltd. for detailed information, and all rights from this data sheet are reserved by Shengyi Technology Co., Ltd.
Explanations: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning
The figures following the letter symbols indicate with the first digit the duration of the preconditioning in hours, with the second digit the preconditioning temperature in ℃ and with the third digit the relative humidity.
Product Certificate
S1600 CQC S.pdf
BSI VC 660215(2016).pdf
S1600 JET.pdf
VDE Certificate.pdf
Data Download
S1600 TDS
S1600 Processing guidelines
S1600 Laminate SGS
S1600 Prepreg SGS
S1600 Laminate MSDS
S1600 Prepreg MSDS